Drill Jumbo Personal Simulator

Software Description

There are six “Simulation Modules” of increasing difficulty. Early Simulation Modules present a single hole to be drilled at a designated position and orientation. Later Simulation Modules require drilling complete rounds and cross-cutting in wider drifts.

Simulation Modules

• Drill steel alignment with an angled target
• Drill steel alignment with laser lines
• Dual-boom, multiple hole drilling
• Dual-boom, multiple hole drilling 2
• Round drilling
• Single boom cross cutting

Key Performance Indicators

Ten (10) unique key Performance Indicators measure how quickly and how carefully the simulated work is performed. Feedback is diagnostic, instead of just a consolidated pass/fail score. They include execution time, grade deviation, drift collisions and vertical deviation at the collar.

Joystick-Style OEM Controls for Simlog’s Drill Jumbo Personal Simulator

For Simlog’s Drill Jumbo simulation software, we are pleased to offer Joystick-style OEM Controls featuring control handles from the operator controls of Atlas Copco’s “Rig Control System” (RCS).

Note that the simulator controls may be used with Simlog’s table-top mounting brackets.

Drill Jumbo Personal Simulator Replica Controls

Lever-Style Replica Controls

Lever-style Replica Controls reproduce the essential elements of Atlas Copco’s “Direct Control System” (DCS) operator controls, as follows:

• Four industrial levers
• One multi-purpose joystick with 8 push-buttons (compatible with many other Simlog products).

Joystick-Style Replica Controls

Joystick Style Replica Controls for Drill Jumbo Personal Simulator feature industrial strength components. There are a total of 8 push-buttons for the thumb, plus a trigger. The USB electronics are built right into the base, so the joystick.

These controls are multi-purpose, so they can be used with Simlog’s Hydraulic Excavator, Bulldozer, Wheel Loader, Mobile Crane, Tower Crane, Forklift, Harvester, Forwarder, and Drill Jumbo Personal Simulators. If you are a Simlog customer, you may be able to re-use the Replica Controls that you already have.

Custom Travel Cases for Replica Controls

For all setups, Simlog’s Custom Travel Case makes transportation easy.

Key Features

• Made-to-measure, with dedicated slots for levers, joysticks, pedals, steering wheel, and tabletop mounting brackets
• Space for a laptop PC, cables, and documentation
• Pull-out handle, with multiple positions
• Wheels (casters)
• Cases are “stackable,” for easy transport

Specifications

• Overall dimensions: 30″ x 24″ x 19″
• Approximate weight: 50 lbs. when empty, up to 100 lbs. when full (depending upon the Replica Controls)

Key Features

• Highly realistic simulation graphics and physics
• 6 Simulation Modules of increasing difficulty
• 10 unique Performance Indicators to comprehensively evaluate the simulated work
• Many kinds of lever-based and joystick-based USB-ready simulator controls and mounting options
• Functionality to slow down, speed up, or reverse control functions
• Viewpoints from inside and outside the cabin that can be changed during simulation

Sample Modules

Module 2: Drill Steel Alignment with Laser Lines

The objective of Module 2 is to learn to drill single stope holes using a single boom and grade and backline orientation cues.

Module 3: Dual-boom, Multiple Hole Drilling

The objective of Module 3 is to learn to drill a series of stope holes using two booms and grade and backline orientation cues.

Module 5: Round Drilling

The objective of Module 5 is to learn to drill a complete round (including stope, contour, and lifter holes) using two booms and grade and backline orientation cues.